भारत सरकार/Government of India
अंतरिक्ष विभाग/Department of Space
भारतीय अंतरिक्ष अनुसंधान संगठन/INDIAN SPACE RESEARCH ORGANISATION
विक्रम साराभाई अंतरिक्ष केंद्र/VIKRAM SARABHAI SPACE CENTRE
तिरुवनंतपुरम/Thiruvananthapuram – 695022
Advertisement No. VSSC-327 DATED 01.07.2023
INVITES APPLICATION FOR THE FOLLOWING POSITIONS
• Note:If your registration number is A2B1C32, please enter RMT323_A2B1C32 as "Merchant Ref Number" whileVerify Payment Status from SBI E-Pay
|
IMPORTANT DATES
|
|
CRUCIAL DATE OF ELIGIBILITY
|
21st
July 2023
|
|
OPENING DATE OF ONLINE APPLICATION
|
05th
July 2023, Time: 1000 Hrs
|
|
CLOSING DATE OF SUBMISSION OF ONLINE APPLICATION
|
21st
July 2023, Time: 1700 Hrs
|
|
TENTATIVE DATE OF WRITTEN TEST
|
TO BE ANNOUNCED IN VSSC WEBSITE
|
Indian Space Research Organisation (ISRO) Centre’s/Units
are engaged in Research and Development activities in the realm of Space
Application, Space Science and Technology for the benefit of society at large
and for serving the nation by achieving self-reliance and developing capacity
to design and build Launch Vehicles and Communication/Remote Sensing Satellites
and thereafter launch them. Online applications are invited for direct
recruitment to the posts of Scientist/Engineer-SD (Level 11 of the Pay Matrix)
and Scientist/Engineer-SC (Level 10 of the Pay Matrix) at constituent ISRO Centres (Group-A Gazetted
posts), as detailed below:
|
POST: SCIENTIST / ENGINEER-SD [LEVEL 11(` 67,700 - ` 2,08,700 )]
|
|
Post Code
|
No. of
posts
|
Centre of Posting
|
Essential
qualifications
|
Physical
Requirements
|
Nature of job
|
|
1503
|
02
(UR-02)
|
VSSC
|
Ph.D in the areas of
Atmospheric Science
OR
Space Science OR
Planetary Science
Expertise in any of
the following areas:
atmospheric
boundary layer physics,
atmospheric
radiation transfer, inversion techniques for atmospheric remote sensing, middle
atmospheric dynamics, magnetohydrodynamic modeling for Earth/ planets/Sun,
Space Weather Modeling/
prediction, Spectroscopy for Earth/ planetary atmospheres, Instrumentation
for atmospheric/ space/ planetary science, Development of satellite payloads
for in-situ observations and remote sensing
with
pre-eligibility qualification as below:
a)
M.E/M.Tech in Engineering OR M.S/M.Sc. in Science
b)
B.E/B. Tech.
c)
B.Sc.
|
S, ST, MF, RW, SE
|
Research and Development in the area of
Atmospheric/ Space/Planetary Sciences with focus on theoretical studies/
modelling/ experimental development and exploration. The activities involve
strong inter-disciplinary research.
|
|
1504
|
01
(UR-01)
|
VSSC
|
PhD in
Mechanical Engineering with
Specialization
in Metal Additive Manufacturing
with pre-eligibility
qualification as below:
a)
M.E/M.Tech in
Mechanical
Engineering OR Metallurgical Engineering OR Metallurgical & Materials
Engineering OR
Material Science
Engineering
b)
B.E/B.Tech in Mechanical Engineering OR Metallurgical
Engineering OR Metallurgical & Materials Engineering OR Material Science
Engineering
|
S, ST, MF, RW, SE
|
Development of
process parameters, printing strategies and optimization for various metal
additive manufacturing processes based on software simulations for the
realization of components for space applications with special alloys
|
|
1505
|
01
(UR-01)
|
VSSC
|
Ph.D in Experimental
cold atoms
with
pre-eligibility qualification as below:
M.E/M.Tech or Equivalent
in
Electronics Engineering & Allied OR
Electrical Engg & Allied OR
M.Sc./M.S or Equivalent in Physics OR
Applied Physics OR
Engineering Physics OR
Solid State Physics
Desirable: Exposure in the
development of latest technologies for a compact cold atom system.
|
S, ST, MF, RW, SE
|
Design, realization
and validation tests of a compact and fully automated portable cold atom
system, Modeling and simulation of the system to quantify and estimate the
uncertainties and errors and realization of a cold atom payload
|
|
POST: SCIENTIST / ENGINEER-SC [LEVEL 10(` 56,100 - ` 1,77,500 )]
|
|
Post Code
|
No. of
posts
|
Centre of Posting
|
Reserved for PWBD
|
Essential
qualifications
|
Physical
Requirements
|
Nature
of job
|
|
Category
|
No. of posts
|
|
1506
|
01
(UR-01)
|
VSSC
|
-
|
-
|
M.E/M.Tech
in
Machine Design OR
Applied Mechanics
with
B.E/B.Tech in
Mechanical Engineering OR Aerospace
Engineering
|
S, ST, MF, RW, SE
|
Design and analysis of
Composites structures, Fracture mechanics of Composites structures,
progressive ply failure analysis and multi scale modelling.
|
|
Post Code
|
No. of
posts
|
Centre of Posting
|
Reserved for PWBD
|
Essential
qualifications
|
Physical
Requirements
|
Nature
of job
|
|
Category
|
No. of posts
|
|
1507
|
04
(UR-04)
|
VSSC
|
-
|
-
|
M.E/M.Tech in
Mechanical Engineering OR
Applied Mechanics
with specialization in
Machine Design OR
Machine Dynamics OR
Structural Dynamics OR
Solid Mechanics OR
Computational and Experimental Solid
Mechanics
with
B.E/BTech in Mechanical Engineering OR
Aerospace Engineering
|
S, ST, MF, RW, SE
|
i. Structural Dynamics
Response, POGO stability analysis, Coupled Load analysis.
ii.
Fracture analysis of pressure vessels
iii.
Configuration design of space robotic systems/mechanisms including 3D
modelling, Structural and thermal design of systems, Kinematic and dynamic
design, simulation and testing of robotic systems
|
|
1508
|
02
(UR-02)
|
VSSC
|
-
|
-
|
M.E/M.Tech in Propulsion Engineering OR Aerospace Engineering
with
B.E/B.Tech in Mechanical or Aerospace Engineering
|
S, ST, MF, RW, SE
|
i. Grain design, performance
prediction of solid motors and igniters, CFD analysis and ignition transient
modelling, CFD code development, simulation studies of solid, hybrid motors.
ii.
Mechanical, flow-field, thermal and propulsion related design,
development, realisation and testing of solid motors. Development of new
concepts and technologies in solid propulsion and allied fields.
|
|
1509
|
02
(UR-02)
|
VSSC
|
-
|
-
|
M.E/M.Tech in
Metallurgical Engineering OR
Metallurgical & Materials Engineering
OR
Material Science Engineering
with
B.E/B.Tech in
Metallurgical Engineering OR
Metallurgical & Materials Engineering
OR
Material Science Engineering
|
S, ST, MF, RW, SE
|
i.
Alloy design (through
modelling) and their processing.
ii.
Process parameter
development and optimization for Metal Additive Manufacturing Processes.
|
|
Post Code
|
No. of
posts
|
Centre of Posting
|
Reserved for PWBD
|
Essential qualifications
|
Physical
Requirements
|
Nature
of job
|
|
Category
|
No. of posts
|
|
1510
|
01
(UR-01)
|
VSSC
|
-
|
-
|
M.E/M.Tech in
Chemical Engineering OR
Chemical Technology
with
B.E/B.Tech in Chemical Engineering OR
Chemical and
Electrochemical Engineering OR
Chemical Science & Technology OR
Chemical Technology
|
S, ST, MF, RW, SE
|
Electro-chemical process development and its
characterization for metallic coatings of Launch vehicle components.
|
|
1511
|
01
(UR-01)
|
VSSC
|
-
|
-
|
M.E/M.Tech in Control Engineering OR
Control & Instrumentation OR
Control Guidance and navigation
with
B.E/B.Tech in Electronics Engineering OR
Electrical and Electronics Engineering OR
Applied Electronics
|
S, ST, MF, RW, SE
|
Design, development of control loop electronics
for various Inertial sensors & systems
|
|
1512
|
04
(UR-04)
|
VSSC
|
LD (OA, OL, BL, OAL) including LC, Dw, AAV
|
01
|
M.Sc. in Chemistry (General Chemistry)
with
B.Sc. in Chemistry with Mathematics and
Physics subjects as minors
|
S, ST, MF, RW, SE
|
i.
Synthesis
of new energetic materials such as organic high energy materials, energetic
metal complexes, etc. Characterization of high energy materials.
ii. Design, development & processing of thermal
protection systems, polymeric adhesives, sealants, coatings, futuristic green
propellant systems, rubber products.
Design of chemical synthesis processes and development of ceramic
matrix products
iii.
Design
& development of advanced energy systems such as Lithium based battery
cells, Supercapacitors & Supercapattery.
|
|
Post Code
|
No. of
posts
|
Centre of Posting
|
Reserved for PWBD
|
Essential qualifications
|
Physical
Requirements
|
Nature
of job
|
|
Category
|
No. of posts
|
|
1513
|
10
(UR-10)
|
SAC-07
|
LD (OL) including CP, LC, Dw, AAV
|
01
|
M.E/M.Tech in
Micro Electronics OR VLSI Design OR
VLSI & Embedded System Design OR VLSI
& Micro systems OR
Integral Circuits and systems OR
Microelectronics and VLSI Design with
B.E/B.Tech in Electronics and Communication Engineering OR Electrical
and Electronics Engineering
|
S, ST, MF, RW, SE
|
i. Design and Realisation of avionics systems,
embedded systems and
smart sensors incorporating new technologies in
microcontrollers, DSPs, FPGAs and wireless networking.
Design and Realisation
of Mixed Signal complex components.
ii.
VLSI Design and IP Core
development including FPGA prototyping, tool chain operation and end to end analysis
and tape-out of Analog, Digital and Mixed Signal Designs.
Design/qualification and certification of IP cores
|
|
VSSC-03
|
-
|
-
|
|
1514
|
03
(UR-03)
|
SAC-02
VSSC-01
|
-
|
-
|
M.E/M.Tech in
Power
Electronics OR
Power Systems
Engineering OR Power Electronics & Drives OR
Power Control
& Drives OR
Power &
Industrial Drives
with
B.E/B.Tech in
Electrical & Electronics OR
Applied Electronics OR
Electronics & Instrumentation OR Instrumentation & Control OR Electrical Engineering
|
S, ST, MF, RW, SE
|
Development of state of the art and
high-performance power drives with advanced commutation schemes and advanced
motor control strategies for launch vehicles.
|
|
1515
|
03
(UR-03)
|
SAC-01
VSSC-02
|
-
|
-
|
M.E/M.Tech in RF Engineering OR Microwave Engineering OR
Radar Engineering
with
B.E/B.Tech in Electronics &
Communication Engineering
|
S, ST, MF, RW, SE
|
i. Design, simulation and
realization of RF subsystems like diplexer and filters.
ii.
Design, development and realization of systems including High
sensitive and secure Telecommand Receiver with advanced Modulation
techniques, Range and Range Rate Transponder in X Band, Radio Landing System,
Radar Altimeter, etc.
|
|
Post Code
|
No. of
posts
|
Centre of Posting
|
Reserved for PWBD
|
Essential
qualifications
|
Physical
Requirements
|
Nature
of job
|
|
Category
|
No. of posts
|
|
1516
|
06
(UR-06)
|
VSSC-02
SDSC-03
NRSC-01
|
-
|
-
|
M.E/M.Tech in Industrial
Engineering OR
Industrial Engineering and Management OR
Industrial and Production Engineering with
B.E/B.Tech in Mechanical
Engineering OR
Production Engineering OR
Industrial Engineering
|
S, ST, MF, RW, SE
|
i. Project Management/Programme
Management, Budget Planning and Control, R&D management, Management
Information Systems, Human Resources planning and assessment, Costing of
systems
ii.
Technology management, Industry co-ordination, intellectual property
management, technical documentation and outreach activities.
|
|
1517
|
04
(UR-04)
|
VSSC-02
SDSC-01
LPSC-01
|
-
|
-
|
M.E/M.Tech in Industrial Safety
Engineering
with
B.E/B.Tech in Fire & Safety Engineering OR
Mechanical
Engineering
|
S, ST, MF, RW, SE
|
Providing safety surveillance/ clearances
for processing hazardous materials. Job Safety Assessment & Analysis. Planning,
Installation and maintenance of Fire Protection Systems and Fire Detection
Systems.
|
|
1518
|
04
(UR-04)
|
VSSC-03
SDSC-01
|
-
|
-
|
M.E/M.Tech in Manufacturing Engineering OR
Production Engineering
with
B.E/B.Tech in Mechanical
Engineering OR
Production Engineering
|
S, ST, MF, RW, SE
|
i.
Overall
management of production of composite products for Launch
vehicle and Satellite programmes.
ii.
QA and Failure analysis of components and mechanical systems.
iii.
Developing machinery maintenance practices
|
|
1519
|
02
(UR-02)
|
VSSC-01
SDSC-01
|
-
|
-
|
M.E/M.Tech in
Non-Destructive Testing (NDT)
with
B.E/B.Tech in
Metallurgy OR Mechanical Engineering OR Production Engineering
|
S, ST, MF, RW, SE
|
Non-Destructive Testing, Evaluation & analysis of aerospace materials using conventional and advanced methods.
|
|
Post Code
|
No. of
posts
|
Centre of Posting
|
Reserved for PWBD
|
Essential
qualifications
|
Physical
Requirements
|
Nature
of job
|
|
Category
|
No. of posts
|
|
1520
|
10
(UR-10)
|
VSSC-05
|
HH
|
01
|
B.E/B.Tech in Chemical
Engineering OR
Chemical and Electrochemical
Engineering OR
Chemical Science & Technology OR
Chemical Technology
|
S, ST, MF, RW, SE
|
i.
Development
of high energy propellants,
process scale up and automation of production operations for
solid propellant motors.
ii. Quality assurance for energy systems for launch
vehicles and spacecraft including auditing of external work centers.
iii. Design and development of advanced energy systems
including electrode processing, configuring battery, cell assembly, etc.
iv.
Process & Plant Design,
Reaction Engineering, Design & Development of Chemical Systems.
v.
Activities related to solid
motor production areas namely Qualification of raw materials, processing,
mixing, casting, disposal etc.
|
|
SDSC-05
|
LD (OA, OL, BL,OAL) including LC, Dw, AAV
|
01
|
|
HH
|
01
|
|
Note :
1. Those who possess the required qualification as on the last date of
application (as on 21.07.2023`) and those candidates who are going to complete
the required qualification in the academic year 2022-23 are also eligible to
apply, provided final degree is available by 31.08.2023 and their aggregate
is 60% marks or CGPA 6.5/10 for ME/M.Tech course
and 65% or CGPA 6.84/10 for B.E/B.Tech/M.Sc./
course (average of all semesters for which results are available.
2. M.E / M.Tech should be in First Class with an aggregate minimum of 60% marks (average of all semesters) or CGPA / CPI grading of a minimum
of 6.5 on a 10 scale or equivalent.
3. B.E / B.Tech
/ M.Sc should be in First Class with an aggregate
minimum of 65% marks (average of all semesters) or CGPA / CPI
grading of a minimum of 6.84 on a 10 scale or
equivalent.
4. B.Sc. should be in First
Class with an aggregate minimum of 60% marks
(average of all semesters) or CGPA / CPI grading of a minimum of 6.5 on a 10 scale or equivalent.
5. Essential qualification (ie Post Graduation / Graduation) should have been
completed within the stipulated duration of the course as prescribed by the
University. Where a University mentions both CGPA / CPI and percentage of marks in its Degree Certificate or Consolidated Mark
sheet, then at least one criteria (either CGPA or percentage) should meet
DOS/ISRO’s eligibility norms.
6. Where a University
mentions only CGPA / CPI in its Degree Certificate
or Consolidated marksheet, then the CGPA / CPI so mentioned should necessarily meet DOS/ISRO’s eligibility criteria.
Conversion of CGPA / CPI into percentage of marks
is not permitted to determine eligibility, regardless of whether any
conversion formula is prescribed by the University/Institution concerned. The
same criteria apply mutatis mutandis in cases where only percentage of marks
is mentioned in the Degree Certificate / Consolidated marksheet.
7. Candidates possessing Degrees awarded by foreign universities should produce
the equivalency certificate issued by the Association of Indian Universities
(AIU), New Delhi, at the time of interview.
8.
For Post Nos. 1503 to 1512, the Centre of
Posting is VSSC. For Post Nos. 1513 to 1520, the vacancies are scattered
across multiple Centres as indicated above. Therefore, the candidates
applying against post Nos. 1513 to 1520 are required to provide their order
of preference in the Centre of posting.
However, the selected candidates are liable to be posted in any of the
Centres/Units of the Indian Space Research Organisation / Department of Space
situated anywhere in India as and when required.
9.
Persons with Benchmark Disability (PWBD) can apply for
the posts suitable to them even if the post is not identified for them.
However, such candidates will be considered for selection to such posts by
general standard of merit. Persons suffering from not less than 40% of
relevant disability shall alone be eligible for the benefit of age relaxation
as permissible under rules.
10.
The above vacancies may vary depending upon the actual
requirement.
11. DOS/ISRO reserves
the right not to fill up any of the posts, if it so desires.
|
|
ABBREVIATIONS USED
|
|
01
|
VSSC
|
Vikram Sarabhai Space Centre, Thiruvananthapuram, Kerala
|
|
02
|
SDSC
|
Satish Dhawan Space Centre, SHAR, Sriharikota,
SPS Nellore District, Andhra Pradesh
|
|
03
|
NRSC
|
National Remote Sensing Centre, Balanagar,
Hyderabad, Telengana
|
|
04
|
LPSC
|
Liquid Propulsion Systems Centre, Thiruvananthapuram
|
|
05
|
SAC
|
Space Applications Centre, Ahmedabad, Gujarat
|
|
06
|
UR
|
Un-reserved
|
13
|
PWBD
|
Persons with Benchmark Disabilities
|
20
|
BL
|
Both Leg
|
|
07
|
OA
|
One Arm
|
14
|
OL
|
One Leg
|
21
|
CP
|
Cerebral Palsy
|
|
08
|
OAL
|
One Arm and One Leg
|
15
|
LC
|
Leprosy Cured
|
22
|
D
|
Deaf
|
|
09
|
Dw
|
Dwarfism
|
16
|
AAV
|
Acid Attack Victims
|
23
|
ST
|
Standing
|
|
10
|
HH
|
Hard of Hearing
|
17
|
S
|
Sitting
|
24
|
SE
|
Seeing
|
|
11
|
MF
|
Manipulation by Fingers
|
18
|
RW
|
Reading & Writing
|
|
|
12
|
BA
|
Both Arms
|
19
|
LD
|
Locomotor Disability
|
|
"Government strives to have a workforce which reflects
gender balance and women candidates are encouraged to apply"
General
conditions / Instructions
01.
The posts are temporary, but likely to
continue.
02.
Age Limit (as on 21.07.2023), Pay and Allowances
|
Sl
No
|
Post
Code
|
Post
|
Age
limit (years)
|
Basic
Pay
|
|
01
|
1503
to 1505
|
Scientist /
Engineer-SD
|
35
years
|
` 67,700/-
|
|
02
|
1506
to 1511
1513
to 1519
|
Scientist /
Engineer-SC
|
30
years
|
` 56,100/-
|
|
03
|
1512
& 1520
|
Scientist /
Engineer-SC
|
28
years
|
` 56,100/-
|
Serving Central
Government employees, Ex-Servicemen & Persons with Benchmark Disability (PWBD) are eligible for age relaxation
as per Government of India orders.
In addition to Basic
Pay, Dearness Allowance (DA), House Rent Allowance (HRA) and Transport
Allowance (TA) are payable as per extant rules on the subject. The employees
will be governed by the New Pension Scheme. Further, Medical facilities
(Contributory Health Service Scheme) for self and dependents, subsidised
canteen facilities, limited quarters facility (in lieu of HRA), Leave Travel
Concession, Group Insurance, House Building Advance etc are admissible as per
Central Government orders
03.
The
Organisation has a progressive HRD policy which provides an excellent growth
potential for the right individual through its periodical merit based performance
review system (called Merit Promotion Scheme) de-linked from availability of vacancies
for the advancement of their career in the Organisation.
04. Candidates will have to produce the proof of
the details furnished in their applications submitted on-line as and when
required.
05. HOW
TO APPLY:
|
Scientist/Engineer-SD
posts (Post Nos. 1503 to 1505)
|
Scientist/Engineer-SC
posts (Post Nos. 1506 to 1520)
|
|
Applications will be received on-line
through ISRO Live Register portal only. Accordingly, candidates
are advised to either register or update their registrations in the
Live Register portal of ISRO https://www.isro.gov.in on or
before 21.07.2023 (1700 hours).
|
Applications will be received on-line
only and all further communications will be made to the applicants through
e-mail / VSSC website only. Therefore, the applicants are
advised to check their e-mail and visit the VSSC website from time to time.
For submission of online applications, please visit VSSC website https://www.vssc.gov.in
1000 hours on 05.07.2023 to 1700 hours on 21.07.2023.
|
The candidates registered under National Career
Service (NCS) portal and fulfilling the eligibility conditions may visit ISRO
website and follow the application procedure as stated above.
06.
PAYMENT
OF APPLICATION FEE:
There is no application fee for the post of Scientist/Engineer-SD (Post
Nos. 1503 to 1505).
For the post of Scientist/Engineer-SC (Post Nos. 1506 to 1520, all
applicants have to uniformly pay Rs.750 as application fee. Female / Scheduled
Castes (SC) / Scheduled Tribes (ST) / Ex-servicemen [EX-SM] and Persons with
Benchmark Disabilities (PWBD) candidates will be refunded full fee subject
to the condition that the candidates should appear in the written test. For
other candidates, an amount of Rs.500 will be refunded in due course duly deducting
bank charges as applicable on appearing written test. Fee may be paid online
through Credit Card / Debit Card / Internet Banking / UPI only through
Integrated SBI ePay facility. No other mode of
payment will be acceptable. All applicable service charges for payment of fee
shall be borne by the applicant. The refundable portion of examination fee
shall be refunded duly deducting bank charges as applicable. The application
fee paid by the candidates whose application is incomplete or those who have not
submitted their application or whose application is rejected, will not be
refunded. The applicants shall correctly furnish Bank details for the purpose
of Refund of application fee viz. Account No., IFSC Code, Name of Bank,
Name of Branch and Name of the Account Holder. VSSC will not be held
responsible for any issues arising in refund of the application fee as a result
of incorrect entry of bank details by the applicant in the online application.
In this regard, the applicants belonging to the following categories are
required to upload their relevant certificates as follows :
1. SC/ST candidates – SC/ST certificate
2. Ex-servicemen candidates – Discharge certificate
3. PWBD candidates – Disability certificate
Note : In case
of submission of duplicate/multiple applications the latest application against
which the ‘application fee’ has been received within the last date of payment
of application fee only will be considered.
07. Upon successful on-line registration, applicants will be provided with an
on-line Registration Number, which should be carefully preserved for future
reference. The candidates are also advised to take a printout of the online
application for future reference.
08. The
applicants need not send any documents (by post/email) such as printout of
online application, copies of certificates / mark lists in proof of educational
qualification, work experience, age etc.
09. Applications submitted without complete information,
photo, signature etc. will summarily be rejected.
10.
Candidates
should be willing to undergo biometric verification, if required.
11. Selection PROCESS :
|
Post
|
Scientist/Engineer-SD
(1503 to 1505)
|
|
Selection Process
|
Based
on the online application made in ISRO Live Register portal, initial
screening will be conducted for shortlisting the candidates for interview.
Candidates called for Interview will have the option to answer the questions
in Hindi also. Please note that the qualification prescribed is the minimum
requirement and the same does not automatically make candidates eligible for
interview / selection. The final selection will be based on performance of
candidates in the interview only.
|
|
Post
|
Scientist/Engineer-SC
|
|
Selection Process
|
A.
All valid applicants will be called
for written test. Written test venues will be in Ahmedabad, Chennai, Ernakulam,
Hyderabad & Thiruvananthapuram. Candidates can
apply for multiple posts, subject to conditions. However, candidates applying
for multiple posts should select same written test centre location.
B.
Question Paper Pattern for Written
Test
|
Post
Nos.
|
Question
paper pattern
|
|
1506 to 1511,
1513 to 1519
(Based on
M.E / M.Tech as essential qualification)
|
Part ‘A’ (Objective
type) – Area/Discipline Specific part - Consists of 60 Multiple Choice
Questions (MCQs) of 1 mark each (+1 and -1/3 pattern of marking) – 75
minutes duration
Part ‘B’
(Objective type) – Aptitude/Ability Tests – Consists of maximum 15 Multiple
Choice Questions (MCQs) totaling to 20 marks (No negative marks) - 30
minutes duration
Questions will be based on Numerical
Reasoning, Logical Reasoning, Diagrammatic Reasoning, Abstract
Reasoning & Deductive Reasoning.
Part
‘C’ (Descriptive
type) – Maximum 20 marks – 30 minutes duration
|
|
1512 & 1520
|
Part ‘A’
(Objective type) – Area/Discipline Specific part - Consists of 80 Multiple
Choice Questions (MCQs) of 1 mark each (+1 and -1/3 pattern of marking) –
90 minutes duration.
Part ‘B’
(Objective type) – Aptitude/Ability Tests – Consists of maximum 15 Multiple
Choice Questions (MCQs) totaling to 20 marks (No negative marks) – 30
minutes duration
Questions will be based on
Numerical Reasoning, Logical Reasoning, Diagrammatic Reasoning, Abstract Reasoning & Deductive Reasoning.
|
C.
Interview
Based on performance in the written
test, candidates will be short-listed for interview in the ratio of 1:5, with
a minimum of 10 candidates. For reserved vacancies, distinct candidates will
be short-listed in the ratio of 1:5, regardless of reserved candidates if
any, short-listed under UR category.
D. Qualifying
Crtieria
|
Post
|
Category
|
Written
Test
|
Interview
|
Qualifying
criteria (Aggregate)
|
|
1506 to 1511,
1513 to 1519
(Based on
M.E
/ M.Tech as essential qualification)
|
Unreserved
|
50% each
in Part ‘A’, ‘B’ & ‘C’
|
50/100
marks
|
60%
|
|
Reserved
candidates, only if a post is reserved
|
40% each
in Part ‘A’, ‘B’ & ‘C’
|
40/100
marks
|
50%
|
|
1512 & 1520
|
Unreserved
|
50% each
in Part ‘A’ & ‘B’
|
50/100
marks
|
60%
|
|
Reserved
candidates, only if a post is reserved
|
40% each
in Part ‘A’ & ‘B’
|
40/100
marks
|
50%
|
E.
Weightage in Panel Generation
For generation of final panel, 50%
weightage will be given to Written Test marks and 50% weightage to interview
marks.
|
12. Only
Indian Nationals need apply.
13. No
interim correspondence will be entertained.
14. Canvassing
in any form will be a disqualification.
15. Candidates working under
Central / State Government, Public Sector Undertakings, Autonomous bodies etc.
should submit their application through proper channel or submit ‘No objection
certificate’ at the time of interview.
WARNING:
• Beware of Touts and job racketeers trying to deceive by
false promises of securing job in DOS/ISRO either through influence or by use
of unfair and unethical means. DOS/ISRO never appoints any agent(s) or coaching
center(s) for action on its behalf. Candidates are warned against any such
claims being made by persons/agencies. Candidates are selected purely as per
merit. Beware of unscrupulous elements and do not fall in their trap.
• Candidates are advised to visit only the official
website of VSSC/ISRO and beware of FAKE websites and social media content put
up by unscrupulous elements/touts.
